-
files/Single_Channel_Variable_Micropipette.jpg
-
files/Single_Channel_Micropipette.jpg
Abdos SVP series single channel pipettes cover everyday liquid handling in seven adjustable ranges, from 2 µL up to 10 mL. An ergonomic hook handle gives a secure grip in the palm, a unique tip-eject button reduces effort when removing tips and a clear reading window shows the set volume. The tip cone is made from durable, chemical-resistant material, and the pipette can be partly autoclaved at 121 °C for easy maintenance.
Key features
- Ergonomic handle with hook for an easy, secure grip in the palm
- Unique tip-eject button design
- Clear reading window for the set volume
- Partly autoclavable at 121 °C
- Tip cone made of durable, chemical-resistant material
- Easy to calibrate and maintain
- Seven volume ranges from 2 µL to 10 mL
Technical specifications
| Pipette type | Single channel, adjustable volume |
| Volume ranges (select as variant) | 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL, 1–10 mL |
| Volume display | Clear reading window |
| Autoclavable | Partly, at 121 °C |
| Tip cone | Durable, chemical-resistant material |
| Handle | Ergonomic hook design |
Frequently asked questions
Which volume range should I choose?
Pick the range whose maximum is just above the volume you pipette most often, since accuracy is best in the upper part of the range. The seven ranges are 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL and 1–10 mL.
What does partly autoclavable mean?
Only part of the pipette, usually the lower section that carries the tip cone, can be steam sterilised at 121 °C. The upper body with the plunger and volume display should not be autoclaved. Check the instruction manual for exactly which parts can go in the autoclave.
How do I read and set the volume?
The set volume shows in the reading window. Turn the volume adjuster until the window shows the volume you need, and never go beyond the range printed on the pipette.
How does the tip-eject button work?
Hold the pipette over a waste container and press the eject button firmly. The tip drops off without you touching it, which keeps your hands clear of contaminated tips.
What is the correct pipetting technique?
Press the plunger to the first stop, dip the tip a few millimetres below the liquid surface and release the plunger slowly to draw up the liquid. Move to the target vessel, press to the first stop and then to the second stop to empty the tip, withdraw the tip and release the plunger.
What accuracy can I expect?
Accuracy and repeatability are checked by the gravimetric method in ISO 8655. The standard allows ±0.8 % at the top of the 10–100 µL, 20–200 µL and 100–1000 µL ranges, with larger percentage tolerances at smaller volumes. Ask us for the test data for this model.
How do I check or calibrate it?
Weigh water dispensed onto an analytical balance at a stable room temperature and compare the result with the set volume, as described in ISO 8655-6. The design allows easy calibration adjustment; follow the instruction manual.
How do I clean and maintain it?
Wipe the outside with 70 % ethanol or a mild detergent and keep liquid out of the shaft. Store it upright, and replace worn seals or lightly lubricate the piston as the manual advises if volumes start to drift.
Which tips fit this pipette?
Use tips matched to the range you buy. Tip fit affects accuracy, so tell us the range you need and we will confirm compatible tips.
Can I get a GST invoice and a bulk or institutional quotation?
Yes. Labmart supplies colleges, hospitals, pharma companies and government laboratories across India and issues a GST invoice with every order. For bulk or institutional quantities, send us the size and quantity you need and we will share a quotation.
- Regular price
- Rs.5,500.00
- Sale price
- Rs.2,900.00
Abdos SVP series single channel pipettes cover everyday liquid handling in seven adjustable ranges, from 2 µL up to 10 mL. An ergonomic hook handle gives a secure grip in the palm, a unique tip-eject button reduces effort when removing tips and a clear reading window shows the set volume. The tip cone is made from durable, chemical-resistant material, and the pipette can be partly autoclaved at 121 °C for easy maintenance.
Key features
- Ergonomic handle with hook for an easy, secure grip in the palm
- Unique tip-eject button design
- Clear reading window for the set volume
- Partly autoclavable at 121 °C
- Tip cone made of durable, chemical-resistant material
- Easy to calibrate and maintain
- Seven volume ranges from 2 µL to 10 mL
Technical specifications
| Pipette type | Single channel, adjustable volume |
| Volume ranges (select as variant) | 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL, 1–10 mL |
| Volume display | Clear reading window |
| Autoclavable | Partly, at 121 °C |
| Tip cone | Durable, chemical-resistant material |
| Handle | Ergonomic hook design |
Frequently asked questions
Which volume range should I choose?
Pick the range whose maximum is just above the volume you pipette most often, since accuracy is best in the upper part of the range. The seven ranges are 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL and 1–10 mL.
What does partly autoclavable mean?
Only part of the pipette, usually the lower section that carries the tip cone, can be steam sterilised at 121 °C. The upper body with the plunger and volume display should not be autoclaved. Check the instruction manual for exactly which parts can go in the autoclave.
How do I read and set the volume?
The set volume shows in the reading window. Turn the volume adjuster until the window shows the volume you need, and never go beyond the range printed on the pipette.
How does the tip-eject button work?
Hold the pipette over a waste container and press the eject button firmly. The tip drops off without you touching it, which keeps your hands clear of contaminated tips.
What is the correct pipetting technique?
Press the plunger to the first stop, dip the tip a few millimetres below the liquid surface and release the plunger slowly to draw up the liquid. Move to the target vessel, press to the first stop and then to the second stop to empty the tip, withdraw the tip and release the plunger.
What accuracy can I expect?
Accuracy and repeatability are checked by the gravimetric method in ISO 8655. The standard allows ±0.8 % at the top of the 10–100 µL, 20–200 µL and 100–1000 µL ranges, with larger percentage tolerances at smaller volumes. Ask us for the test data for this model.
How do I check or calibrate it?
Weigh water dispensed onto an analytical balance at a stable room temperature and compare the result with the set volume, as described in ISO 8655-6. The design allows easy calibration adjustment; follow the instruction manual.
How do I clean and maintain it?
Wipe the outside with 70 % ethanol or a mild detergent and keep liquid out of the shaft. Store it upright, and replace worn seals or lightly lubricate the piston as the manual advises if volumes start to drift.
Which tips fit this pipette?
Use tips matched to the range you buy. Tip fit affects accuracy, so tell us the range you need and we will confirm compatible tips.
Can I get a GST invoice and a bulk or institutional quotation?
Yes. Labmart supplies colleges, hospitals, pharma companies and government laboratories across India and issues a GST invoice with every order. For bulk or institutional quantities, send us the size and quantity you need and we will share a quotation.
- Regular price
- Rs.5,500.00
- Sale price
- Rs.2,900.00
GST Invoice included
(Save 18% on business purchases)
Need Quote ?
Get Bulk Order Quotation for your lab or Tender Quotation at special discounts !
Contact our support team at support@labmart.in to get the best quote for your bulk order requirement.
Sales Support - +918920746300
Technical Support- +919667893959
Kindly allow us a time of 2-3 days to properly match all the inquired specs, we will also provide authorization(s) to dealers for particular tenders (on tender basis)
Product Description
Abdos SVP series single channel pipettes cover everyday liquid handling in seven adjustable ranges, from 2 µL up to 10 mL. An ergonomic hook handle gives a secure grip in the palm, a unique tip-eject button reduces effort when removing tips and a clear reading window shows the set volume. The tip cone is made from durable, chemical-resistant material, and the pipette can be partly autoclaved at 121 °C for easy maintenance.
Key features
- Ergonomic handle with hook for an easy, secure grip in the palm
- Unique tip-eject button design
- Clear reading window for the set volume
- Partly autoclavable at 121 °C
- Tip cone made of durable, chemical-resistant material
- Easy to calibrate and maintain
- Seven volume ranges from 2 µL to 10 mL
Technical specifications
| Pipette type | Single channel, adjustable volume |
| Volume ranges (select as variant) | 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL, 1–10 mL |
| Volume display | Clear reading window |
| Autoclavable | Partly, at 121 °C |
| Tip cone | Durable, chemical-resistant material |
| Handle | Ergonomic hook design |
Frequently asked questions
Which volume range should I choose?
Pick the range whose maximum is just above the volume you pipette most often, since accuracy is best in the upper part of the range. The seven ranges are 2–20 µL, 5–50 µL, 10–100 µL, 20–200 µL, 100–1000 µL, 1–5 mL and 1–10 mL.
What does partly autoclavable mean?
Only part of the pipette, usually the lower section that carries the tip cone, can be steam sterilised at 121 °C. The upper body with the plunger and volume display should not be autoclaved. Check the instruction manual for exactly which parts can go in the autoclave.
How do I read and set the volume?
The set volume shows in the reading window. Turn the volume adjuster until the window shows the volume you need, and never go beyond the range printed on the pipette.
How does the tip-eject button work?
Hold the pipette over a waste container and press the eject button firmly. The tip drops off without you touching it, which keeps your hands clear of contaminated tips.
What is the correct pipetting technique?
Press the plunger to the first stop, dip the tip a few millimetres below the liquid surface and release the plunger slowly to draw up the liquid. Move to the target vessel, press to the first stop and then to the second stop to empty the tip, withdraw the tip and release the plunger.
What accuracy can I expect?
Accuracy and repeatability are checked by the gravimetric method in ISO 8655. The standard allows ±0.8 % at the top of the 10–100 µL, 20–200 µL and 100–1000 µL ranges, with larger percentage tolerances at smaller volumes. Ask us for the test data for this model.
How do I check or calibrate it?
Weigh water dispensed onto an analytical balance at a stable room temperature and compare the result with the set volume, as described in ISO 8655-6. The design allows easy calibration adjustment; follow the instruction manual.
How do I clean and maintain it?
Wipe the outside with 70 % ethanol or a mild detergent and keep liquid out of the shaft. Store it upright, and replace worn seals or lightly lubricate the piston as the manual advises if volumes start to drift.
Which tips fit this pipette?
Use tips matched to the range you buy. Tip fit affects accuracy, so tell us the range you need and we will confirm compatible tips.
Can I get a GST invoice and a bulk or institutional quotation?
Yes. Labmart supplies colleges, hospitals, pharma companies and government laboratories across India and issues a GST invoice with every order. For bulk or institutional quantities, send us the size and quantity you need and we will share a quotation.
