• Free Shipping

    Orders above Rs. 1000.

  • On Time Delivery

    Within 7 days.

  • Money Back Guarantee

    14 day Return*

  • Service Support

    Online Installation Support.

Product Description

Bending of beam apparatus for determining Young's modulus of the material of a beam from its depression under load. Supplied by Labmart as part of the ChemLab physics range for colleges.

Key features

  • Beam supported on two knife edges
  • Depression read with a pin and scale or microscope arrangement
  • Elasticity experiment for B.Sc. practicals

Technical specifications

Product Bending of Beam Apparatus
Experiment Young's modulus of a beam by bending
Arrangement Beam on knife edges with weight hanger at the centre
Quantities measured Load (g), depression (mm), span, breadth and thickness of the beam

Principle

A beam supported at two knife edges and loaded at its centre bends. The depression at the centre is proportional to the load, and its value depends on the span, the dimensions of the beam cross-section and the Young's modulus of the material.

Formula: Y = W l³ / (4 b d³ δ) (beam on two supports, load W at the centre, span l, breadth b, thickness d, depression δ)

Experiment procedure

  1. Place the beam symmetrically on the knife edges and hang the weight hanger at the centre.
  2. Note the pointer or microscope reading with the dead load.
  3. Add weights in equal steps and record the reading each time, then unload.
  4. Measure l, b and d, plot load against depression and use the slope in the formula.

Apparatus required (not included)

  • Weights (not included unless stated)
  • Travelling microscope or vernier arrangement for depression
  • Vernier calliper and screw gauge
  • Metre scale

What is supplied

Bending of beam apparatus as listed by the vendor. Contact Labmart for the exact contents.

Frequently asked questions

What is the Bending of Beam Apparatus used for?

Bending of beam apparatus for determining Young's modulus of the material of a beam from its depression under load.

What does the experiment need besides the apparatus?

Weights (not included unless stated); Travelling microscope or vernier arrangement for depression; Vernier calliper and screw gauge; Metre scale.

What is Young's modulus?

The ratio of tensile stress to tensile strain within the elastic limit.

Why is a small depression needed?

The formula is valid only for small bending within the elastic limit.

Where can I find dimensions and weight?

Contact Labmart for overall dimensions and weight.

What is supplied with it?

Bending of beam apparatus as listed by the vendor. Contact Labmart for the exact contents.

Is it suitable for college practicals?

It is intended for undergraduate and senior-secondary physics laboratories. Please check it against your university or board practical list.

Will I get a GST invoice, and can I get a bulk quotation?

Yes. Labmart issues a GST invoice with every order and provides quotations for bulk and institutional purchases. Share quantity and delivery location to receive a quote.

Does Labmart supply colleges and government labs?

Yes. Labmart is a B2B supplier to colleges, hospitals, pharma companies and government labs across India, and is registered on GeM.

How soon can it be delivered?

Send your delivery pincode and quantity and our team will confirm the dispatch timeline.

Similar Products

Customers also bought

    Complementary products